Iron And Glass Coffee Table – They will be 2 coffee tables, build with a iron structure. The largest 45 cm high, made with iron bars. Which will hold a circular cover 60 cm in diameter, removable so that it is also use as a tray. The smallest will be 34 cm high x 40 in diameter. The bases of the tables will be build in roll steel bar of 100x5mm that come in strips of 6m.
For the base of the large iron and glass coffee table. It is necessary to cut with an angle grinder 1 piece of 175cm and 2 pieces of 77cm. For the base of the small table, you need 1 piece of 128.8cm and 2 pieces of 54.3cm. Mark the plate of 1.75 m at 26, then 40.5 cm. Then 42 cm, 40.5 cm more and finally 26 cm. And the 77 cm decks should be mark at 21 cm and then at 61.5 cm from the edge. The marks make are not cut completely. Only a thin line is review to be able to bend the bar without breaking, the idea is to make a fold.
12 Photos Gallery of: Iron And Glass Coffee Table Build Structure
Mark on the iron and glass coffee table plate that will be use to weld the trapezium shape that is in the plans. Bend the bars following the trapeze shape that was jade. When the folds fit, click with welding, check that the angles are correct and weld definitively with a thicker and continuous cord.