How to Build a Pergola on Concrete Patio Ideas

May 18th

How to Build a Pergola on Concrete Patio is an outdoor structure that is used to define a place for outdoor entertaining. Pergola has a breakthrough roof and provides limited shade and little or no protection from wind and weather. They are used both as a gazebo for house furniture and create a covered walkway in a garden. Building your own pergola can beautify your garden at a relatively small cost.

How To Build A Pergola On Concrete Patio Wood
How To Build A Pergola On Concrete Patio Wood

Instructions

How to Build a Pergola on Concrete Patio can Agreement with a local concrete company to pour a 9 of 9 foot pad. You can use quick set concrete and pour it yourself, but it will have a less glossy surface. Use an angle bar and a chalk line or pen to mark the bar brackets in each corner of the concrete slab, 8 inches from the outer edge. Once the posts are set, it will create a pergola which is an 8 by 8 foot square. Attach anchors to the concrete slab using a drill bit and 1/4 inch screws that will use concrete.

12 Photos Gallery of: How to Build a Pergola on Concrete Patio Ideas

Image of: How To Build A Pergola On Concrete Patio Wood
Image of: How To Build A Pergola On Concrete Patio Small
Image of: How To Build A Pergola On Concrete Patio Simple
Image of: How To Build A Pergola On Concrete Patio Review
Image of: How To Build A Pergola On Concrete Patio Plan
Image of: How To Build A Pergola On Concrete Patio Narrow
Image of: How To Build A Pergola On Concrete Patio Kit
Image of: How To Build A Pergola On Concrete Patio Interest
Image of: How To Build A Pergola On Concrete Patio House
Image of: How To Build A Pergola On Concrete Patio Exterior
Image of: How To Build A Pergola On Concrete Patio Done
Image of: How To Build A Pergola On Concrete Patio Design
 
Related  Retractable Patio Covers Options

How To Build a Pergola on Concrete Patio Stand the posts in anchors, using one level to ensure they stand straight up. Run a 2-inch nail through the holes in the anchor and into service at each corner. Create a pattern for the ends of each bar. Traditional patterns include a curved cutaway and an angle across the bottom corner of each boom. The design should be no more than 8 inches tall and 8 inches deep. Draw the pattern at the end of each 2 with 10 beams using a pen. Cut the area under the trace line of 2 by 10 with a jigsaw or circular saw.