Bar stools for kitchen islands – Do you have a countertop bar in your kitchen island and are planning to build a bar stool or two for that? This article goes through step by step instructions on building a simple wood swivel bar stool. You only need some carpentry tools, plywood, wood stains or paint you choose a turntable and hardware.
Construct your bar stools for kitchen islands, lay two leg pieces on the floor parallel to each other 7 inches apart. Place a 7 inch long piece between the legs at one end so that you have three sides of a rectangle. Run a 2½ inch screw through the side of both legs at the ends of the shorter bit. Place another 7 inch piece between the legs 2 meters away from the other 7 inch piece. Screw it to both legs with 2½ inch screws.
13 Photos Gallery of: Design Bar Stools for Kitchen Islands
Then for build bar stools for kitchen islands, place the two sections on the side of one leg parallel to each other 7 inches apart so that the 7 inch pieces are vertical. Screw the remaining four 7 inch 2 by 2 pieces between the legs not attached yet to the same level as the other four 7 inch pieces. You now have four legs with a square frame that holds them together at the top and another square frame two meters below it. Place 10 inch square piece of plywood on the top of the frame on top of the four legs.